波多野结衣av高清中文字幕-国产综合无码一区二区辣椒-国产午夜影视大全免费观看-亚洲av日韩av一区二区三曲

We always focus on the field of "injection molding machine"

products center

> Product > Energy-Saving Servo Injection Molding Machine
YS monochrome machine
Model number: YS-125
Views:
Support hotline:86-752-6833832
Detailed description
YS series servo energy-saving injection molding machine
Precise clamping system, outstanding efficiency, efficient servo drive, all meet all requirements. Focus on customer products, provide al complete set of technical solutions for customers, and create better investiment returns and customer experience for global customers.
MOLD CLAMPING UNIT
Mold opening & closing with 4 stages control, ejecting with 2 stages control. Clamping and ejection are by liner tranducer. Its precision can reach 0.01mm, and contrlo the clam-ping and ejection stroke route accurately. Ejector have function of vibration ejection, ejection atop, multiple ejection pressure and speed of ejection can piecewise set by computer Equipped with high precision low pressure mold closing protection it can be set directly by monitor, low pressure result is perfect. Toggle is used by auto lubrication system, lubrication setting can be operated monitored on the panel directly. And it owns itself lubrication failure alarm function to ensure the machine operating normally.
High Precision
A hydraulic motor drives a planetary gear to ensure perfect and rigid mold height adjustment.
 
High rigidity
The optimized design on rigidity mold platen improve the precision of the product.
 
High response
Increase the speed and saves power form 20%~50% depending upon the molding.
 
INJECTION UNIT
Improved the precision of the machine and prolong the service life of the machine greatly reduced the consumption!
In view of different material and applications we supply variety of screw and barrel for customer choice.
High precision
Injection unit adopts linear guide rail built-in carriage cylinder, and integral casting support, thus enhence its rigidity, and make the compact structure.
 
High stability
Double-carriage cylinder is adopted to ensure stable injection.
 
 
CONTROL SYSTEM
MH9118 control system, dual CPU inndependent processor controller with high efficiency and stable running speed.
Machine can connect data with OPCUA、MES etc. management software systems to realize intelligent production.
Abundant SPC quality statistics management, effectively improve productivity.
Servo hydraulic driving technology
YS series standard injection machine &Product application
 
TECHNICAL PARAMETERS
Project Unit YS-60 YS-100 YS-130
Injection unit INJECTION UNIT   150 250 500
Screw diameter mm Φ24 Φ26 Φ30 Φ30 Φ35 Φ40 Φ35 Φ40 Φ45
Screw L/D ratio L/D 20 19 18 26 22 20 25 22 20
Theoretical injection volume cm3/sec 55 65 86 106 144 188 173 226 286
Injection weight(ps) g 49 58 77 95 129 168 154 202 255
oz 1.7 2.0 2.7 3.3 4.5 5.9 5.4 7.1 9.0
Injection pressure kg/cm2 2722 2320 1742 2613 1920 1740 2331 1785 1410
Plasticizing capacity g/s 2 3 4 4 7 10 6 9 12
Screw stroke mm 122 150 180
Scrwe speed rpm 240 267 225
Injection speed mm/s 114 101 94
Injection rate cm3/sec 51 60 80 71 97 127 90 118 149
Clamping unit Clamping force KN 600 1000 1300
Mold opening stroke mm 300 360 410
Mold thickness range mm 120-350 100-430 120-490
Mold heght min. mm 205*205 234*234 267*267
Tie bar distance mm 310*310 360*360 410*410
Ejector stroke mm 60 100 100
Ejector force KN 27 27 27
Other Pump motor power Kw 9.4 12.5 15.5
Temperature control range (range)set (0-400℃)*4 (0-400℃)*4 (0-400℃)*4
Heater power kw 3.2 6 18 7 23
Machine dimension mm 4100*1020*1800 4400*1035*1880 4917*1139*2026
Oil tank L 130 160 160
Machine weight ton 2.5 3.5 4.5
Max. system pressure kg/cm2 140 140 140
Platen dimensions
Platen dimensions
Machine dimensions
 
TECHNICAL PARAMETERS
Project Unit YS-160 YS-200 YS-260
Injection unit INJECTION UNIT   600 800 1100
Screw diameter mm Φ40 Φ45 Φ50 Φ40 Φ50 Φ55 Φ50 Φ55 Φ60
Screw L/D ratio L/D 24 21

19

 23 21 19 24 22 20
Theoretical injection volume cm3/sec 274 347 428 358 442 534 471 570 678
Injection weight(ps) g 244 309 382 319 394 477 420 509 605
oz 8.6 10.9 13.5 11.3 13.9 16.8 14.8 17.9 21.4
Injection pressure kg/cm2 2205 1742 1411 2333 1890 1562 2394 1979 1663
Plasticizing capacity g/s 7 10 14 10 14 18 14 18 24
Screw stroke mm 218 225 240
Scrwe speed rpm 189 180 180
Injection speed mm/s 96 91 89
Injection rate cm3/sec 120 152 188 144 178 215 175 212 253
Clamping unit Clamping force KN 1600 2000 2600
Mold opening stroke mm 450 510 540
Mold thickness range mm 160-550 160-610 160-670
Mold heght min. mm 299*299 332*332 380*380
Tie bar distance mm 460*460 510*510 580*580
Ejector stroke mm 110 130 150
Ejector force KN 40 40 54
Other Pump motor power Kw 18.7 25.8 28.8
Temperature control range (range)set (0-400℃)*4 (0-400℃)*4 (0-400℃)*4
Heater power kw 8.42 11.75 15
Machine dimension mm 5608*1047*2045 5818*1143*2180 6766*1145*2215
Oil tank L 200 320 400
Machine weight ton 5.5 7.5 11
Max. system pressure kg/cm2 140 140 140
Platen dimensions
Platen dimensions
Machine dimensions
 
TECHNICAL PARAMETERS
Project Unit YS-320 YS-380 YS-470
Injection unit INJECTION UNIT   1700 2200 3000
Screw diameter mm Φ60 Φ65 Φ70 Φ65 Φ70 Φ75 Φ75 Φ80 Φ85
Screw L/D ratio L/D 23 21 19 23 22 20 22 21 19
Theoretical injection volume cm3/sec 791 929 1077 1015 1177 1351 1501 1708 1928
Injection weight(ps) g 706 829 961 906 1050 1206 1340 1525 2131
oz 24.9 29.3 33.9 32.0 37.1 42.5 47.3 53.8 75.2
Injection pressure kg/cm2 2191 1867 1610 2195 1893 1649 2050 1801 1596
Plasticizing capacity g/s 27 34 43 27 33 41 39 47 56
Screw stroke mm 280 306 340
Scrwe speed rpm 205 106 150
Injection speed mm/s 85 92 93
Injection rate cm3/sec 240 281 326 306 355 408 410 466 526
Clamping unit Clamping force KN 3200 3800 4700
Mold opening stroke mm 590 645 730
Mold thickness range mm 200-650 190-790 250-800
Mold heght min. mm 397*397 470*440 530*510
Tie bar distance mm 660*660 720*680 820*780
Ejector stroke mm 185 200 200
Ejector force KN 79 79 99
Other Pump motor power Kw 37 47.2 28.8+28.8
Temperature control range (range)set (0-400℃)*4 (0-400℃)*4 (0-400℃)*4
Heater power kw 15 21 27.22
Machine dimension mm 6740*1752*1604 8198*1752*2295 8300*1976*2405
Oil tank L 450 620 940
Machine weight ton 12 14 18.5
Max. system pressure kg/cm2 140 140 140
Platen dimensions
Platen dimensions
Machine dimensions
 
TECHNICAL PARAMETERS
Project Unit YS-550 YS-650 YS-750
Injection unit INJECTION UNIT   5100 5900 7400
Screw diameter mm Φ80 Φ85 Φ90 Φ95 Φ85 Φ90 Φ95 Φ100 Φ90 Φ95 Φ100 Φ110
Screw L/D ratio L/D 24 23 22 21 23 22 21 20 22 21 20 18
Theoretical injection volume cm3/sec 2165 2444 2741 3053 2552 2861 3188 3533 2988 3330 3690 4464
Injection weight(ps) g 1933 2182 2446 2725 2278 2554 2845 3153 2667 2972 3293 3984
oz 68.2 77.0 86.3 96.1 80.3 90.1 100.4 111.2 94.1 104.8 116.2 140.5
Injection pressure kg/cm2 2380 2108 1880 1688 2329 2078 1865 1683 2498 2242 2023 1672
Plasticizing capacity g/s 47 57 68 79 60 71 84 98 76 89 104 139
Screw stroke mm 431 450 470
Scrwe speed rpm 152 160 170.8
Injection speed mm/s 90 86 76
Injection rate cm3/sec 452 511 573 638 487 545 608 673 484 540 598 724
Clamping unit Clamping force KN 5500 6500 7500
Mold opening stroke mm 800 900 1000
Mold thickness range mm 300-900 350-1100 400-1100
Mold heght min. mm 525*525 560*560 626*626
Tie bar distance mm 860*860 910*910 980*980
Ejector stroke mm 220 220 240
Ejector force KN 161 226 209
Other Pump motor power Kw 28.8+37 28.8+37 37+37
Temperature control range (range)set (0-400℃)*4 (0-400℃)*4 (0-400℃)*4
Heater power kw 3 15 34.25 40.73
Machine dimension mm 9809*2033*2746 10189*2067*2681 11101*1982*3296
Oil tank L 1000 1200 1400
Machine weight ton 24 29 40
Max. system pressure kg/cm2 170 170 170
Platen dimensions
Platen dimensions
Machine dimensions
 
TECHNICAL PARAMETERS
Project Unit YS-850 YS-1000 YS-1250 YS-1480
Injection unit INJECTION UNIT   9800 11000 11000 25000
Screw diameter mm Φ95 Φ100 Φ110 Φ120 Φ100 Φ110 Φ120 Φ130 Φ100 Φ120 Φ130 Φ140 Φ130 Φ140 Φ150 Φ160
Screw L/D ratio L/D 23 22 20 18 23 21 19 18 21 19 18 17 23 21 20 19
Theoretical injection volume cm3/sec 3684 4082 4939 5878 4318 5224 6217 7297 5224 6217 7297 8462 10746 12463 14307 16278
Injection weight(ps) g 3288 3643 4408 5246 3853 4663 5549 6512 4663 5549 6512 7553 9591 11123 12769 14528
oz 116.0 128.5 155.5 185.1 135.9 164.5 195.7 229.7 164.5 195.7 229.7 266.4 338.3 392.3 450.4 512.4
Injection pressure kg/cm2 2670 2410 1992 1673 2570 2124 1785 1521 2124 1785 1521 1311 2390 2061 1795 1578
Plasticizing capacity g/s 97 113 151 196 110 146 190 241 155

202

 256 320 189 236 290 352
Screw stroke mm 520 550 550 810
Scrwe speed rpm 186 180 191 141
Injection speed mm/s 86 88 94 86
Injection rate cm3/sec 611 677 724 975 694 840 1000 1174 894 1063 1248 1448 1138 1320 1515 1724
Clamping unit Clamping force KN 8500 10000 12500 14200
Mold opening stroke mm 1000 1100 1275 1450
Mold thickness range mm 400-1200 400-1300 450-1400 500-1500
Mold heght min. mm 625*625 690*690 790*790 845*845
Tie bar distance mm 1060*1060 1160*1160 1260*1260 1320*1320
Ejector stroke mm 240 300 320 340
Ejector force KN 209 262 262 300
Other Pump motor power Kw

37+28.8+28.8

 37+37+28.8 37+37+37 42+42+31.4
Temperature control range (range)set (0-400℃)*4 (0-400℃)*4 (0-400℃)*4 (0-400℃)*4
Heater power kw 46.48 51.2 62.78 76.13
Machine dimension mm 11251*1982*3396 11936*2535*2826 12820*2535*2801 14420*2940*3161
Oil tank L 1600 1700 1700 2500
Machine weight ton 42 50.8 74 84
Max. system pressure kg/cm2 170 170 170 170
Platen dimensions
Platen dimensions
Machine dimensions
 
YS Series Configuration
YS Series Configuration?  
　 Optional
Clamping Unit
Precision clamping Transducer / ejecting Transducer /injection Transducer ●
Platens and toggles using QT500-7A material ●
Reserved thread hole for robot ●
Hydraulic drive gear for mold adjustment ●
Hydraulic and electrical safety protection ●
Wearable manganese steel rail below movable platen ●
Automatic centralized lubrication system ●
Multi ejection funtions ●
Low pressure mold protection ●
T-slot & mounting hole platen ●
Automatic mold thickness adjustment ●
Ejector backward reset function ●
Anti - jamming Buffer Strip on safety door ●
Machine cover on clamping unit? fulll closed protection（ top cover for machines lower than 2m） ●
Mechanical safety lock ○
Special mold mounting holes ○
Mold hanger (Max 200T) ○
Mold insulation board ○
Enlarged ejector force and ejector stroke ○
Enlarged Max. mold height ○
Magnetic Platen ○
Ejector backward confirmation funciton ○
Change the fixed plate mould positioning ring ○
Protective baffle between machine base and movable door ○
Injection Unit
Double injection cylinders ●
Low speed high torque hydraulic motor ●
Nitriding alloy steel screw & barrel ●
Cooling device on hopper feeding area ●
Nozzle and barrel multi-section PID temperature control ●
Double carriage movement cylinders ●
Semi enclosed insulation barrel cover, nozzle protection cover ●
Anti-cold start screw protection ●
Automatic purge function ●
Nozzle back and forth movable before and after plasticizing? ●
Hopper sliding or scrolling unit（60-450T) ●
Screw speed detection ●
Ceramic heater? ○
High speed low torque hydraulic motor ○
Special screw and barrel（Electroplating, alloy, PC, PMMA, PBT, PA,etc） ○
Fan for cooling barrel ○
Spring self-locking nozzle ○
Increase/decrease injection stroke, or screw & barel size ○
Rotating injection unit? ○
Infrared heater ○
Position Transducer control on Injection unit ○
Manual centralized grease lubrication pump on injection unit (>550T) ●
Manual centralized grease lubrication pump on injection unit (<550T) ○
Stainless steel? hopper ○
Hopper rail (>450T) ○
Hopper rail (<450T) ●
protection device on hopper feeding area ○
Hydraulic system
Third generation servo pump system ●
High precision real-time bypass filter device ○
Low noise energy saving hydraulic circuit ●
Brand hydraulic valve ●
Brand hydraulic seal ●
Differential fast mold clamping oil circuit (>200T) ●
Built-in cooler ( <450T ) ●
Mold openning brake oil circuit（mold open back pressure） ●
Automatic detection of oil temperature/high and low temperature alarm ●
Exposed high pressure tubing with explosion - proof chain ●
1 set hydraulic core pull with valve（2 sets for 550T and above ) ●
multi-sect water distruibutor with fast plug ●
Plasticizing proportional back pressure control? (> 550T) ○
Increase multi-stage oil pumps and motors ○
upgrading plasticizing motor sizes ○
Synchronous ejection, core pulling, and plasticizing ○
High response energy storage servo injection system ○
Multiple core-pulling devices ○
Hydraulic rotary demoulding device ○
Glass tube cooling flow meter ○
Hydraulic oil position sensor ○
Hydraulic safety valve with position feedback ○
Hydraulic safety cam valve ●
Electrical Unit
Forced protection of barrel heating ●
Input and output view screen ●
Automatic heat preservation and automatic heating setting function ●
Injection pressure holding mode: time/position/time+position ●
10-inch TFT LCD display (>550T) ●
8-inch TFT LCD display (<550T) ●
240 groups of large-capacity process parameter storage, USB port ●
Multiple languages ●
Multi-level password protection , operation panel with lock button key ●
Emergency Stop protection of front and rear safety doors ●
Quality data process control interface ●
Production process control (SPC) real-time list interface ●
Reserve a variety of interfaces such as air blowing, pull back protection, etc. (with software, without hardware) ●
Two sets of AC380V/16A three-phase sockets, one set of AC220V/10A multi-function two or three plug sockets ●
Hot runner mould needle valve control ○
China standard Robot electrical interface ○
European standard 67 Robot electrical interface ○
European standard 12 Robot electrical interface ○
Electric safety door (>550T) ●
Two-color warning lights ●
Hot runner mold interface ○
Air-operated sequence valve ○
Electric rotating demoulding interface ○
Adjustable power supply voltage ○
A set of blowing valve device ○
Sets blowing valve device ○
Gas-assisted injection device ○
Central (networked) monitoring system ○
Infrared Grating protection in front and rear safety doors (>550T) ○
Energy consumption display ○
Electric meter ○
electrically heated coil with Solid State Relay ●
Computer system with European brand ○
Direct temperature control for ejection nozzle ○
Rear safety door operation (customer commitment to safety responsibility) ○
The front safety door closes in place and confirms on the screen ○
Main power with Air switch ●
Electric heating master control with AC contactor ●
Isolation transformer ○
Others
Manual ●
Suspension feet ●
Toolbox and tools ●
Mould clamps ●
Special wrench for Nozzle ●
Hydraulic oil ○
Dryer ○
Automatic feeding machine ○
Remarks: ● means the function is standard; ○ means the function is optional; 　
 
HORIZONTAL BAKELITE SPECIAL INJECTION MOLDING MACHINE
PRODUCT APPLICATION:
Be used for a variety of thermosetting (Bakelite materia) Bakelite, Tableware, Hand wheel, Bakelite handle, cutlery, panhandle, Pot ears, Knife handle, Bakelite knob, Switch, Oven accessories, Terminals, End button, Meter accessories, Meter shell and etc.
SPECIALIZED INJECTION MOIDING MACHINE FOR FRUIT FRAME
PRODUCT APPLICATION: Product application: Apple frame, mango frame, orange frame, grape frame, etc.
PRODUCT CHARACTERISTICS:
1. Reinforce the Energy-Saving servo Motor system;
2. The Platen, Tie bar and Main parts adopt new design of hardening analysis;
3. Adopt specialized computer controller, machine can run fast and stably, which is 10%-20% faster than the common fruit frame machine of the same type in the market;
4. The lubrication system adopts point-to-point quantitative lubrication system to ensure that every point of lubricated in properly supplied;
5. Adopt specialized Bi-metallic alloy screw for fruit frame machine to extend the service life of screw.
 
TECHNICAL PARAMETERS
Project 單位Unit YS-130B YS-160B YS-200B YS-300B
Injection unit Screw diameter mm Φ36 Φ40 Φ40 Φ44 Φ44 Φ50 Φ68 Φ75
Theoretical injection volume cm3 163 226 274 331 342 442 1111 1351
Injection volume gram 180 250 303 366 378 488 1227 1492
ozs 4.3 5.9 8.6 10.4 10.8 13.9 35.0 42.5
Injection pressure kg/cm2 2035 1470 2205 1822 2440 1890 2006 1648
Injection speed mm/s 88 84 90 80
Injection rate cm2/sec 92 127 106 128 145 188 291 354
Clamping unit Closing force metrictons 128 160 200 300
Clamping stroke mm 410 450 510 590
Mold thickness mm 120-490 160-550 160-610 200-650
Recommended minimum mold size mm 267*367 299*299 332*332 397*397
Big column inner distance mm 410*410 460*460 510*510 660*660
Die size mm 600*600 670*670 745*745 894*894
Pallet stroke mm 100 110 130 185
Electrical Equipment Electric motor Kw 14.1 16.5 21.2 31.4
Temperature control range (range)set (0-400℃)*4 (0-400℃)*4 (0-400℃)*4 (0-400℃)*4
Electric heating capacity Kw 8.88 11.45 14.4 19.75
Other Mechanical dimensions（LxWxH） mm 5000*1050*1790 5555*1100*1790 6080*1250*1860 7340*1430*2100
Oil tank liter 210 250 340 450
Machine weight metrictons 4.5 5.5 7.5 12
Maximum system pressure kg/cm2 140 140 140 140
 
TECHNICAL PARAMETERS
Project 單位Unit YS-320K YS-380K YS-470K YS-550K
Injection unit Screw diameter mm Φ65 Φ75 Φ85 Φ95
Theoretical injection volume cm3 929 1351 1928 3053
Injection volume gram 829 1206 1721 2725
ozs 29.2 42.5 60.7 96.1
Injection pressure kg/cm2 1417 1648 1770 1535
Injection speed mm/s 106 103 105 107
Injection rate cm2/sec 350 453 593 760
Clamping unit Closing force metrictons 300 380 470 550
Clamping stroke mm 590 645 730 800
Mold thickness mm 200-650 190-790 250-800 350-900
Recommended minimum mold size mm 397*397 425*415 475*475 525*525
Big column inner distance mm 660*660 710*690 760*760 860*860
Die size mm 894*894 1000*980 1120*1120 1250*1250
Pallet stroke mm 185 200 200 220
Electrical Equipment Electric motor Kw 31.4 31.4 42.4 30+30
Temperature control range (range)set (0-400℃)*4 (0-400℃)*4 (0-400℃)*4 (0-400℃)*4
Electric heating capacity Kw 19.75 23.05 23.05 27.7
Other Mechanical dimensions（LxWxH） mm 7340*1430*2100 8020*1500*2175 8340*1920*2210 9350*1950*2220
Oil tank liter 450 620 780 1000
Machine weight metrictons 12 14 18.5 24
Maximum system pressure kg/cm2 140 140 140 140
 

Note: The output of this product parameter is calculated according to the specific gravity of polystyrene of 1.05, assuming an efficiency of 0.88. As the product is continuously researched and improved, the design changes are subject to change without notice.
Related Products